Gas Heating Teppanyaki Table Equipment Operation Precautions

This is an article about "Oil Teppanyaki Equipment Operation Instructions". Of course, you can also click on "Electric Heating Teppanyaki Table Equipment Operation Instruction".

Gas heating teppanyaki table equipment steps:

1. Please check the air source before use. The air source used in your locality is consistent with the gas source marked on the nameplate of Teppanyaki equipment.

2. When the gas source is confirmed to be the same, first turn on the main power switch, then start the fan switch to press the damper knob to the clockwise direction to the maximum, and then exhaust the air for a few seconds.

3. Then open the gas main valve and the “ Teppanyaki” gas valve, press the gas switch with your right hand and rotate it 15 degrees counterclockwise, and then release it after about 10 seconds. At this point, the gas seedling fire is turned on, and the thermocouple safety valve is sucked. Pry the gas switch again, rotate it 90 degrees counterclockwise and then release it. At this time, the main fire is turned on and at the maximum position.

4. If the main fire is to be turned off, use the right hand to pry the gas switch and turn it counterclockwise to the 170 degree position. This is the minimum fire.

5. If there is a lampblack purifier in “Teppanyaki”, please turn it on before cooking.

6. If you need to turn off the “Teppanyaki” pressure gas switch, turn it clockwise to the 0 position.

7. If the ignition does not occur for several times, check the ignition wire and the battery for failure.

Warning: The grounding wire must be connected to the design of the electrical components. The fan must be turned on before ignition.

Precautions:

1. The user must carefully read the “Instructions for Use” before operation, and strictly follow the requirements and procedures to make “japanese teppanyaki gas grill” live better and longer.

2. It is not allowed to place flammable or explosive materials near "Teppanyaki".

3. Users should not modify the gas pipeline and disassemble the gas appliance by themselves, so as to avoid accidents such as gas leakage.

4. The installation, service and maintenance of “teppanyaki” must be operated by a professional electrician.

5. Please do not use excessive force when operating.

6. Please pay attention to the waterproofness of electrical components when cleaning.

Cookeryaki, the leading professional Manufacturer of Teppanyaki Grill Equipment in China. The main products include teppanyaki tables, teppanyaki grill, teppanyaki equipment for home, smokeless hibachi table, hibachi grill and other teppanyaki equipment. sells at the original cheap price, and there is no middleman to make a difference.