Cleaning method for indoor teppanyaki grill oil fume purifier

1. Open the main engine door with the key equipped with the indoor teppanyaki grill oil iron burner, and enter the electric control box.

2. Turn off and confirm that the power of the "teppanyaki grill for home" is off.

3. Use a screwdriver to unscrew the fixing screws of the plate.

4. Pull out the filter and plate carefully, taking care not to use too much force, so as not to damage the plate and the components on the plate.

5. Please pour hot water into the pre-prepared cleaning container until it is full. Equipped with plate cleaning solution.

6. Immerse the electrode plate in the cleaning solution. When the electrode plate is cleaned for the first time, the recommended immersion time is not more than 10 minutes. If the electrode plate is too dirty, you can extend the immersion time appropriately.

7. Take out the soaked plate from the water and air dry it, or use a tool whose temperature does not exceed 100 degrees to dry it.

8. Wipe clean the inside of the purifier with cotton cloth, and clean up the debris. Such as around the purifier, around the drain hole.

9. Put the air-dried electrode plate back into the purifier exactly as it was when it was extracted. Tighten the screws with the T-shaped handle provided or close the electric control box and the purifier with the special handle for the handle lock and lock the door lock.

Note: Do not open the oil fume purifier while the power is on. There is danger of high voltage.