EL-250 Channel Diswasher
* Mechanical button operation, easy to understandThe disc temperature, can be observed at any time the datao Cleaning door opening height of any adjustment, easy to operate
* Cleaning arm assembly and disassembly, does not require any tools
* Concave attempts to prevent the nozzle, a wide range of flush red and strong
* Multiple safety protection, making the peace of mind, must be assured
* Health and energy-saving design, reduce operating costs
* Dual heated wash tank structure, washing capacity up to 257 baskets / hour
* Strong self-draining wash pump to ensure excellent cleaning and health effects
* Good temperature control function, to ensure that each cycle spray water temperature is above 82 ℃
* The door switch lock to prevent hot water splashing wounding
* Motor overload protection, to avoid the transmission system by blocking the destruction of the cup basket
* Automatic temperature control solid state allergy resistance, to every second
* Reference float monitoring of heating low water level protection and leak-proof device water protection
Tenchnical Parameters: | |
Dimensions(mm): | 2070*768*1783 |
Maximum amount of washing (baskets/hour): | 257 |
Maximum washing height(mm): | 450 |
Washing heating power(KW): | 15 |
Sparay heating power(KW): | 36 |
Maxmum hourly water consumption(liters): | 514 |
Eash basket water(liters/basket): | 2.0 |
Electricity And Spray Heater Configuration : | |
Model:EL-250 | |
Heating method: | electricity |
Total electricity consumption: | 55KW |
Inlet temperature: | 10-50℃ |
Cleaning heater: | 2*7.5KW |
Spray heater: | 36KW |
other: | 2.5KW |
Model:EL-250ZC | |
Heating method: | steam |
Total electricity consumption: | 1.7KW |
Inlet temperature: | 10-50℃ |
Cleaning heater: | 2*7.5KW |
Spray heater: | 36KW |
other: | 2.5KW |
Model:EL-250RC | |
Heating method: | gas |
Total electricity consumption: | 1.7KW |
Inlet temperature: | 10-50℃ |
Cleaning heater: | 2*7.5KW |
Spray heater: | 36KW |
other: | 2.5KW |
Washing Capacity Reference: | ||||||
Mode | 6 inch disc | 10 inch disc | 18 inch disc | cup | knife and fork | chopsticks |
EL-250 | 6900 | 4500 | 2250 | 9000 | 30000 | 60000 |
Installation Requires Connection:
Power: 380v/50hz/3p( three-phase five-wire system), cable:≥ GB 25m㎡,
Steam Connection: steam pressure: 0.5-3. 5bar, steam consumption: 70kg/h
Gas connection: water pressure ≥ 0.15mpa; Gas Consumption: 5-5.5m³/h;gas generator tank 68kg, external tank 120kg
Inlet diameter: 6 (ft), drain diameter: 2 (in); Water pressure: 1.055kg/cm²~1.76kg/cm², preferably 1. 4kg/cm², you need to install pressure over 1.76kg/cm²valve (with other companies)
Water temperature: 10 ℃ or 50 ℃, according to the configuration of the heater,
Water hardness: 0.034-0.103g/L
For information about instaling an exhaust hood(other companies), Displacement: inlet end -5.7m³/min, outlet end-11.3m³/min